Dependable, stable and highly precise precision regulation
The Type-100 is a high precision, multi-stage pressure regulator. This pressure controller provides the highest level of regulation accuracy and repeatability available. The Type-100 is ideal for applications that call for the utmost of control and maximum stability under variable operating conditions. A stainless steel measuring capsule is used as a sensing element to activate the high gain servo balanced control mechanism in which the main valve is controlled by a pilot valve.This allows for greater accuracy and eliminates many of the problems associated with conventional regulators using range springs and diaphragms.
|Standard version relief-offered in three pressure ranges (2-40 psi, 2-60 psi, 2-120 psi) and three port sizes (1/8", 1/4", 3/8").|
High relief capacity allows for quick "blow-down" capability for rapid exhaust of output pressure. Ideal for pneumatic counterbalance applications.
Extra High Relief
|Extra high relief allows quick "blow-down" for up to 15 scfm (450 Nl/min) exhaust capacity|
|Low range capability provides acurate pressure regulation at lower output range. Operates with an output pressure range of 0.5 psig to 25 psig. Maximum supply pressure is 50 psig.|
|Linear actuation of a plunger controls regulated pressure rather than manual adjustment of a knob.|
|Bottom ported supply and output pressure, as well as four tapped mounting holes for manifold mounting. Suitable for applications with limited space.|
|Motorized regulator. Regulation accuracy and sensitivity of the Type-100. Suitable for remote, "fail in place" applications.|
|Flow Capacity||14 SCFM (420 Nl/min) at 100 psig (7 BAR) supply 20 psig outlet (1.4 BAR) outlet.|
5 psig (0.4 BAR) above 20 psig (1.4 BAR) set point
Type 100: 3 SCFM (85 Nl/min)
Type 100HR - 11 SCFM (311 Nl/min) (High Relief)
Type-100EHR - 15 SCFM (425 Nl/min) (Extra High Relief)
|Sensitivity||1/8" (3.2 mm) water|
|Pilot Pressure Chamber Bleed Rate||less than 0.08 SCFM (2.4 Nl/min)|
|Total Air Consumption||6 scfh (3 Nl/min)|
|Effect of Supply Pressure Variation||of 25 psig (1.7 BAR) on outlet less than .005 psig (0.003 BAR)|
|Maximum Supply Pressure||150 psig (10.3 BAR) [100LR max 50 psig (3.4 BAR)]|
|Operating Temperature||-20° F to +160° F (-29° C to +71° C)|
|Weight||1.4 lb. (635g)|
|Port Sizes||1/8", 1/4", 3/8" NPT/BSP|
|Gage Ports (2)||1/4" NPT/BSP|
|Output Pressure Ranges||0.5 - 25 psig (0.03 - 1.7 BAR) - Type-100LR only
2 - 40 psig (0.14 - 2.8 BAR)
2 - 60 psig (0.14 - 4.1 BAR)
2 - 120 psig (0.14 - 8.3 BAR)
|Mounting Options||Pipe or panel|
|Materials||Body: diecast zinc alloy.
Capsule and adjusting screw: stainless steel.
Assemblies: stainless steel, brass, plated steel, acetal.
Diaphragms: Buna-N elastomer and polyester fabric.
Knob: phenolic plastic.
Tamperproof Cover - to order with tamperproof cover add a "T" to end of part number. See drawing for dimensions.
BSP Porting - to order with BSP porting add a "U" to end of the model number.
Preset Pressure - Output pressure can be preset at factory. Consult factory for ordering information.
Tapped Exhaust - to order with a 10-32 trapped exhaust vent and barbed bleed screw add an "E" to end of part number.
Oxygen Compatible - consult factory for ordering information.
Mounting Bracket: - P/N: 446-707-045
Pressure Gauge - Gauge is 2in. (50.8 mm) diameter face, 1/4 NPT back connection.
0-15 psi P/N: 446-725-003
0-30 psi P/N: 446-725-004
0-60 psi P/N: 446-725-001
0-160 psi P/N: 446-725-002